this is information on a product in full production. for further information contact your local stmicroelectronics sales office. may 2014 docid025580 rev 2 1/3 EVAL-VNH5019-P1 vnh5019 motor driver carrier data brief - production data features ? operating voltage: 5.5 - 24 v ? output current: 12 a continuous (30 maximum) ? 5v and 3.3 v compatible inputs ? pwm operation up to 20 khz for quieter motor operation ? current sense output proportional to motor current ? motor indicator leds (indicates what the outputs are doing even when no motor is connected) ? spc5studio makes it easy to get started using this board and spc56 32-bit power architecture mcu's ? robust: ? reverse-voltage protection ? can survive input voltages up to 41 v ? undervoltage and overvoltage shutdown ? high-side and low-side thermal shutdown ? short-to-ground and short-to-vcc protection description this module is a compact breakout board for st's high-power vnh5019 motor driver ic, a fully integrated h-bridge that can be used for bidirectional speed control of a single brushed dc motor most of the components of the typical application, like pull-up's and protection resistors and fets for reverse battery protection. this module is designed by pololu and distributed by st. it is delivered fully populated with its smd components, including the vnh5019, as shown in the product picture. for more information please visit pololu web site. table 1. device summary order code reference EVAL-VNH5019-P1 EVAL-VNH5019-P1 evaluation board www.st.com
revision history EVAL-VNH5019-P1 2/3 docid025580 rev 2 1 revision history table 1. documen revision history date revision changes 06-dec-2013 1 initial release. 21-may-2014 2 updated description. add table 1 .
docid025580 rev 2 3/3 EVAL-VNH5019-P1 1 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statem ents and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2014 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - swed en - switzerland - united kingdom - united states of america www.st.com
|
